Access Control Security Automatic Barrier Gate Car Parking Fence
We are a professional car park barrier gate manufacture,which
established at 2010, with more than 6 years experience of
researching and developing barrier gate, we have nearly 1200sqm
workshop for 4 zones,about 30 experienced and skilled workers,daily
production of 60 sets boom barrier gate
|Arm Type||Straight Arm: Max 6 meters, Size 45×100mm and 45*80 mm aluminum
Fence Arm: Two or three fence arm, Max 6 meters, aluminum alloy
|Rating Voltage||AC 220V/110V±10%, 50/60HZ|
|Spring And Bearing||Heat Treatment: more durable, more than 5 million times through
|Remote Control Distance||≥30m|
Galvanized plate or Cold roll plate, 2mm thickness sheet
3 years without rust, shedding and fading
1. Professional manufacture with 8 years
2. OEM/ODM service
3. Short lead time
4. The overall design, independent mould
5. Quality gurantee, more durable
6. Better service from professional team
2. Common malfunctions and solutions
1. Motor works but there is no reacion on the arm;
a. Please check whether the clutch device is locked or not.
2. The boom could not rise up or fall down to the end;
a. When change a long boom to a short one, please readjust it ,
b. The sensor dose not plug well, please check it.
c. The "Speed adjust switch" is wrong adjust, please readjust it.
3. The distance of the charge capacity of the remote controller is
enough or not
4. There is no reaction when pressing the remote controller
a. Please check whether the power is supplied to the barrier gate
b. Please check whether the fuse is burnt out or not
c. Please check whether the code both in the remote controller and
the controller board are accordant or not
Any question about toll gate price, quality, shipment, please don’t
hesitate to contact us. Becky
will reply your within 5 minutes when I am in office during 8:00 am
to 22:00pm in Chinese Time.
Many thanks in advance .